2737A PUNCHED TAPE READER OPERATING INSTRUCTIONS


1.  Set power switch ON. To prepare for loading tape, place in LOAD position, by
    pressing RUN tab down.

2.  Place tape in holder with feed holes toward the panel and positioned so that the
    tape will unwind counter clockwise when it is being read.

        [PHOTO]

3.  Feed tape through reader from left to right. The first data frames must be to
    the left of the read element. The tape leader must pass between the rollers on
    the right.

        [PHOTO]


I-1

4.  Place in RUN position by pressing up LOAD tab.

        [PHOTO]

5.  To unload tape after it has been loaded or read, press RUN tab down and re-
    move tape.

I-2