The creation of subpackages is based strictly on the contents of the spec file. This doesn't mean that you'll have to learn an entirely new set of tags, conditionals, and directives in order to create subpackages. In fact, you'll only need to learn one.
The primary change to a spec file is structural and starts with the definition of a preamble for each subpackage.
When we introduced RPM package building in chapter ![[*]](crossref.png)
, we
said that every spec file contains a preamble. The preamble contains a
variety of tags that define all sorts of information about the package. In
a single package situation, the preamble must be at the start of the spec
file. The spec file we're creating will have one there, too.
When creating a spec file that will build subpackages, each subpackage also needs a preamble of its own. These ``sub-preambles'' need only define information for the subpackage when that information differs from what is defined in the main preamble. For example, if we wanted to define an installation prefix for a subpackage, we would add the appropriate prefix tag to that subpackage's preamble. That subpackage would then be relocatable.
In a single-package spec file, there is nothing that explicitly identifies the preamble, other than its position at the top of the file. For subpackages, however, we need to be a bit more explicit. So we use the %package directive to identify the preamble for each subpackage.
The %package directive actually performs two functions. As we mentioned above, it is used to denote the start of a subpackage's preamble. It also plays a role in forming the subpackage's name. As an example, let's say the main preamble contains the following name tag:
name: foo
Later in the spec file, there is a %package directive:
%package bar
This would result in the name of the subpackage being foo-bar.
In this way, it's easy to see the relationship of the subpackage to the main package (or other subpackages, for that matter). Of course, this naming convention might not be appropriate in every case. So there is an option to the %package directive for just this circumstance.
The -n option is used to change the final name of a subpackage
from
mainpackage-subpackage to subpackage. Let's modify
the %package directive in our example above to be:
%package -n bar
The result is that the subpackage name would then be bar instead of foo-bar.
Let's apply some of our newly found knowledge to the spec file we're writing. Here's the list of subpackages that we need to create:
Since our package name is foo, and since the %package
directive creates subpackage names by prepending the package name, the
%package directives for the foo-server and
foo-client subpackages would be written as:
%package server
and
%package client
Since the baz library's package name is not to start with foo, we need to use the -n option on its %package directive:
%package -n bazlib
Our requirements further state that foo-server and foo-client are to have the same version as the main package.
One of the time-saving aspects of using subpackages is that there is no need to duplicate information for each subpackage if it is already defined in the main package. Therefore, since the main package's preamble has a version tag defining the version as 2.7, the two subpackages that lack a version tag in their preambles will simply inherit the main package's version definition.
Since the bazlib subpackage's preamble contains a version tag, it must have its own unique version.
In addition, each subpackage must have its own summary tag.
So based on these requirements, our spec file now looks like this:
Name: foo Version: 2.7 Release: 1 Source: foo-2.7.tgz CopyRight: probably not Summary: The foo app, and the baz library needed to build it Group: bogus/junque %description This is the long description of the foo app, and the baz library needed to build it... %package server Summary: The foo server %package client Summary: The foo client %package -n bazlib Version: 5.6 Summary: The baz library
We can see the subpackage structure starting to appear now.
There are a few more tags we should add to the subpackages in our example spec file. In fact, if these tags are not present, RPM will issue a most impressive warning:
# rpm -ba foo-2.7.spec * Package: foo * Package: foo-server Field must be present : Description Field must be present : Group * Package: foo-client Field must be present : Description Field must be present : Group * Package: bazlib Field must be present : Description Field must be present : Group Spec file check failed!! Tell rpm-list@redhat.com if this is incorrect. #
Our spec file is incomplete. The bottom line is that each subpackage must have these three tags:
It's easy to see that the first two tags are required, but what about summary? Well, we lucked out on that one: we already included a summary for each subpackage in our example spec file.
Let's take a look at the %description tag first.
As you've probably noticed, the %description tag differs from other tags. First of all, it starts with a percent sign. Secondly, its data can span multiple lines. The third difference is that the %description tag must include the name of the subpackage it describes. This is done by appending the subpackage name to the %description tag itself. So given these %package directives:
%package server %package client %package -n bazlib
our %description tags would start with:
%description server %description client %description -n bazlib
Notice that we've included the -n option in the %description tag for bazlib. This was intentional, as it makes the name completely unambiguous.
OK, let's take a look at the spec file after we've added the appropriate %descriptions, along with group tags for each subpackage:
Name: foo Version: 2.7 Release: 1 Source: foo-2.7.tgz CopyRight: probably not Summary: The foo app, and the baz library needed to build it Group: bogus/junque %description This is the long description of the foo app, and the baz library needed to build it... %package server Summary: The foo server Group: bogus/junque %description server This is the long description for the foo server... %package client Summary: The foo client Group: bogus/junque %description client This is the long description for the foo client... %package -n bazlib Version: 5.6 Summary: The baz library Group: bogus/junque %description -n bazlib This is the long description for the bazlib...
Let's take a look at what we've done. We've created a main preamble as we normally would. We then created three additional preambles, each starting with a %package directive. Finally, we added a few tags to the subpackage preambles.
But what about version tags? Aren't the server and client subpackages missing them?
Not really. Remember that if a subpackage is missing a given tag, it will inherit the value of that tag from the main preamble. We're well on our way to having a complete spec file, but we aren't quite there yet.
Let's continue by looking at the next part of the spec file that changes when building subpackages.
In an ordinary single-package spec file, the %files list is used to determine which files are actually going to be packaged. It is no different when building subpackages. What is different, is that there must be a %files list for each subpackage.
Since each %files list must be associated with a particular %package directive, we simply label each %files list with the name of the subpackage, as specified by each %package directive. Going back to our example, our %package lines were:
%package server %package client %package -n bazlib
Therefore, our %files lists should start with:
%files server %files client %files -n bazlib
In addition, we need the main package's %files list, which remains unnamed:
%files
The contents of each %files list is dictated entirely by the software's requirements. If, for example, a certain file needs to be packaged in more than one package, it's perfectly all right to include the filename in more than one list.
The %files list wields considerable power over subpackages. It's even possible to prevent a package from being created by using the %files list. But is there a reason why you'd want to go to the trouble of setting up subpackages, only to keep one from being created?
Actually, there is. Take, for example, the case where client/server-based software is to be packaged. Certainly, it makes sense to create two subpackages: one for the client and one for the server. But what about the main package? Is there any need for it?
Quite often there's no need for a main package. In those cases, removing the main %files list entirely will result in no main package being built.
Please keep in mind that an empty %files list (ie, a %files list that contains no files) is not the same as not having a %files list at all. As we noted above, entirely removing a %files list results in RPM not creating that package. However, if RPM comes across a %files list with no files, it will happily create an empty package file.
This feature (which also works with subpackage %files lists) comes in handy when used in concert with conditionals. If a %files list is enclosed by a conditional, the package will be created (or not) based on the evaluation of the conditional.
Ok, let's update our example spec file. Here's what it looks like after adding each of the subpackages' %files lists:
Name: foo Version: 2.7 Release: 1 Source: foo-2.7.tgz CopyRight: probably not Summary: The foo app, and the baz library needed to build it Group: bogus/junque %description This is the long description of the foo app, and the baz library needed to build it... %package server Summary: The foo server Group: bogus/junque %package client Summary: The foo client Group: bogus/junque %package -n bazlib Version: 5.6 Summary: The baz library Group: bogus/junque %files /usr/local/foo-file %files server /usr/local/server-file %files client /usr/local/client-file %files -n bazlib /usr/local/bazlib-file
As you can see we've added %files lists for:
Each package contains a single file.1 If there was no need for a main package, we could simply remove the unnamed %files list. Keep in mind that even if you do not create a main package, the tags defined in the main package's preamble will appear somewhere - specifically, in the source package file.
Let's look at the last subpackage-specific part of the spec file: the install- and erase-time scripts.
The install- and erase-time scripts, %pre, %preun, %post, and %postun, can all be named using exactly the same method as was used for the other subpackage-specific sections of the spec file. The script used during package verification, %verifyscript, can be made package-specific as well. Using the subpackage structure from our example spec file, we would end up with script definitions like:
Other than the change in naming, there's only one thing to be aware of when creating scripts for subpackages. It's important that you consider the possibility of scripts from various subpackages interacting with each other. Of course, this is simply good script-writing practice, even if the packages involved are not related.
Here we've added some scripts to our spec file. So that our example doesn't get too complex, we've just added preinstall scripts for each package:
Name: foo Version: 2.7 Release: 1 Source: foo-2.7.tgz CopyRight: probably not Summary: The foo app, and the baz library needed to build it Group: bogus/junque %description This is the long description of the foo app, and the baz library needed to build it... %package server Summary: The foo server Group: bogus/junque %description server This is the long description for the foo server... %package client Summary: The foo client Group: bogus/junque %description client This is the long description for the foo client... %package -n bazlib Version: 5.6 Summary: The baz library Group: bogus/junque %description -n bazlib This is the long description for the bazlib... %pre echo "This is the foo package preinstall script" %pre server echo "This is the foo-server subpackage preinstall script" %pre client echo "This is the foo-client subpackage preinstall script" %pre -n bazlib echo "This is the bazlib subpackage preinstall script" %files /usr/local/foo-file %files server /usr/local/server-file %files client /usr/local/client-file %files -n bazlib /usr/local/bazlib-file
As pre-install scripts go, these don't do very much. But they will allow us to see how subpackage-specific scripts can be defined.
Those of you that have built packages before probably realize that our spec file is missing something. Let's add that part now.